February 6, 2017 | Author: Herbert Nelson | Category: N/A
Download The Brands. Powerslide FAQs 1...
Powerslide FAQs
1
FAQ - Speed We receive a lot of calls and e-mails from skaters around the world who have questions to certain products of our speed skating collection or want to get some more detailled information about innovations and technologies we use for the equipment. Some have problems with ther equipment and want a quick answer to solve it. We collected the most common questions and answered them the best we can. We are sure that most of your questions will be answered at your satisfaction. Please do not hesitate to contact us if your answer could not be answered or if you could not find it in our list. Our well trained staff will be pleased to help you. About us Powerslide is THE specialist in speedskating world wide. You will find no other manufacturer offering such a wide range of shoes, frames, wheels or accessories like us. Under the Powerslide roof you can find the following brands: POWERSLIDE CORE RACING MATTER Race Wheels These 4 brands cover the race market for shoes and frames completely and we are proud to be able to offer the worlds fastest wheel collection.
The Brands Powerslide The brand with the best price-value-rating! Powerslide offers equipment with very good fiting and very good performance. It´s a brand for rational thinking people who care about performance and price. The wide range of products covers many target groups. Beginner,, clubs, kids, low budget skater and top athletes will find their fevourite equipment at Powerslide. Powerslide is able to offer the full range of equipment from „Volkswagen“ to „Porsche“ . World champions like for example Kalon Dobbin (NZN), Fabio Francolini (ITA), Yann Guyader (FRA), Pascal Briand (FRA) and many other world class athletes skate on Powerslide equipment. Core Racing The high image brand right next to Powerslide for all those who prefer to drive “Ferrari” instead of “Porsche” or “Volkswagen” - to keep the example. Core Racing is a brand for the individualist, who wants to be different. It’s a brand with a young and fresh image. High end materials and material combinations separate Core Racing from Powerslide. Core Racing is focused on top athletes or those who can afford to spend more money. It’s a brand for the extrovert type. Core Racing attaches great importance to innovations.
Powerslide FAQs
2
General Terms The Last
The last is kind of a copy of a foot. The last can have very different shapes depending on the purpose (for example running shoe or speed boot) and target group. The last is important for the fit and performance of the shoe and can make a huge different. The last for a race shoe must be moulded very accurate around the ankles, in the achilles area or around the fore foot to make sure the shoe has a snug fit and the power of each stroke can be transfered without a loss of energy. There is no need to spent such effort on the last for fitness skates, because this target group wants a very comfortable skate and the padding inside the shoe construction can balance an inaccurate last. You must be aware that the last is always a copy of a standard foot and it is impossible to find THE perfect last that fits ALL skaters feets! Knowing this fact and our aim to be able to serve a wide range of skaters lead into the decision to offer 5 different lasts under the Powerslide umbrella (including Core Racing). We are sure that we can offer a performance race shoe for almost every foot! None of our competitors has this kind of variety! Last Speed Race Performance
Model Powerslide: R2, R4 Powerslide: C6 (165mm Mounting) Core Racing: Triple X, Triple X Pure, Icon, Icon Air Powerslide: C2, C4, C4 Pure, C6 (195mm Mounting), C6 Pure, C8
Chemical Sheets Composite material that is used in soft boots (fitness) or in high cut marathon skates. The chemical sheets in the cuff increase the stiffness and give extra support in the ankle area. The type and strength of the chemical sheet have directly influence on the grade of stiffness and on the fit/comfortof the skate.
Thermo Sheets This „old school“ technology is still common technology in most heat mouldable speed boots. Thermo sheets are thin layers of heat mouldable composites that are placed in between the carbon layers of the shell. Usually thermo sheets have been used around the ankle area of the boot. The boot can be only moulded in the area where the thermo sheet is used and ONLY there, because carbonfiber itself is not heat mouldable at all. Disadvantage of thermo sheets: The material gets brittle after heating several times and the moulding process is limited
Powerslide FAQs
3
SHMR-Technology SHMR is also known as Super Heat Mouldable Resin. This new technology is used in modern race shoes. The shell constructions is completely different compared with boots using thermo sheets. We are using a special heat mouldable epoxy that is combining the different layers of carbonfibre. Race shoes featuring the SHMR-Technology can be heat moulded at ANY spot of the shell, because of the epoxy that is used everywhere in the shell and between each layer of carbonfibre. Another advantage is that the epoxy can be heat moulded as often as you want without loosing its function. The moulding temperature for racing shoes with SHMRTechnology is around 80 degree celsius which is quite low. Another side effect of SHMR is the slightly reduction of weight of the shell. The following racing shoes featuring the new SHMR Technology: Core Racing: Triple X, Triple X Pure, Icon, Icon Air Powerslide: C2, C4, C4 Pure, C6, C6 Pure, C6 junior, C8
Skeleton Concept™ Racing shoes featuring the Skelelton Concept have a unique shell construction. From technical standpoint this technology could only be used with composite materials. The shell has been cut out like a “Swiss Cheese”. Cut-outs are strategically placed to reduce weight, improve comfort and fit, which all transcends to greater product performance. One of the advantages of the Skeleton Concept™ is the improved fit – especially in the ankle area where most athletes have problems. Many speedskaters have problems with painfull bone spurs, because of constant pressure of the shell. Boots that feature a Sleton shell construction have a different cut of the shell which reduces the area where the pressure can result in the above mentioned problems. New manufacturing technologies allowe us to transfer the Skelelton Concept into carbonfiber technology. In this case we call is Skeleton-C Concept. The „C“ stays for Carbonfibre. The following models are featuring the Skeleton Concept™: Powerslide: R2, R2 Kids, R4 The following models are featuring the Skeleton-C Concept™: Core Racing: Triple X, Triple X Pure, Icon, Icon Air
Powerslide FAQs
4
Lorino™ Lorino™ is a high tech microfiber material that we use in several racing shoes for the inner lining. The features are: • • • • •
durable breathable easy to clean light weight comfortable
Lorino™ is used in the following models: Core Racing: Icon, Triple X, Triple X Pure, Icon, Icon Air Powerslide: C2
X-Slot Mounting System™ The combination of the „across” mounting block of some of our racing shoes and the “along” mounting slot on some of our racing frames is forming a “X”. We call this kind of construction the X-Slot Mounting System™. The advantage of the system: The Athlete has endles possibilities to adjust his boot-frame set up to his own individual preferences. No more dead spot like on common systems. The X-Slot Mounting System™ is used on the following racing shoes and frames: Frames • Core Racing: TRIPLE X
Icon •
Powerslide: Double X Venom
13,3” Schiene 4x110mm, 4x100mm 12,8“ Schiene 3x110mm/1x100mm, 4x100mm 12,4“ Schiene 4x100mm 13,3“ Schiene 4x110mm 12,8” Schiene 3x110mm/1x100mm 13,3” Schiene 4x110mm 12,8”Schiene 3x100m/1x90mm 13“ Schiene 4x100mm
Boots • Core Racing: TRIPLE X, Triple X Pure, Icon, Icon Air • Powerslide: C2, C4, C4 Pure, C6 (195mm), C6 Pure, C8
Powerslide FAQs
5
Pitch- und Stride Control™ The concept is based on the experience and idea of world class skater Kalon Dobbin (NZN). There are many different competitions in modern speedskating ranging from 200m sprint to a marathon. Some skaters spezialized for sprint, some for long distance and some skaters are allround skaters performing at highest level in both. At pro level every detail counts to win or loose. Sprintskater for example need more forward flex means more pitch (height difference between front and rear of the boot) whereas long distance skater prefer a smaller pitch. You can also increase the time of contact of your wheels especially in the corners of track races by changing the angle of the shoe to the frame. The Powerslide Pitch and Stride Control™ enables the skater to customize his set up with the target to optimize his performance. The new Powerslide and Core Racing frames support the new system. Thus you will be able to put a flat or angled piece of composite material between your shoes and frames. Pitch Control™: Place the plate under the heel and lean more forward for fast action or place it in the front under the bale to lean more backward for long distance. Stride Control™: The placement of the angled plate can result in a longer push especially on track and can also help to offset leg inbalance (pronation).
X-Torsion Bar™ Reinforcements along the sole shaped like an „X“ provide additional strength and stiffness to the overall shell construction for a better power transfer. X-Torsion Bar™ imroves the resistance against torsion and high pressure forces of boots featuring the 195mm mounting distance. Furthermore the overall weight of the shell has been reduced through the structual cpnstruction. The X-Torsion Bar™ is used on the following racing shoes: Powerslide: C4, C4 Pure Core Racing: Triple X, Triple X Pure
Powerslide FAQs
6
Smart Shell™ The new Smart Shell™ is based on the X-Torsion Bar™, which has been decribed already. With the Smart Shell™ we even take it one stap further now. Besides the reinforcements of the bottom of the shell we now also reinforce the ankle areas along the cuff of the shell. The result is an even better power transefr than already provided by shells featuring the X-Torsion Bar™. The Smart Shell™ can also be combined with our Clima Control System™ to provide air circulation to the inside of the boot for a better performance. The Smart Shell™ is used on the following racing shoes: Core Racing: Icon, Icon Air
Hollow Tube Technology™ Carbonfiber is a very attractive material for good reasons. New materials can match the combination of asthetics and performance that is associated with carbonfiber material. At Powerslide we enhance the performance of carbonfiber by making it lighter. The next step in the evolution of the development of Powerslide race shoes is the sandwich construction of carbon shells. A sandwich construction is a structural panel concept consisting, in its simplest form, of two relatively thin, dense, high strength and parallel sheets of structural material with their faces bonded. The two sheets are separated by a relatively thick, lightweight core such as honeycomb or other structured core. To create stiff and lightweight race boots with a unique look is the basic idea of the sandwich construction. Powerslide developed two concepts in this matter - the HOLLOW TUBE TECHNOLOGY™ The constructions are unique in the industry. The fundamental value of hollow constructions is weight reduction. Hollow tubes positioned between the two mounting blocks of the carbon shell are enbedded bin a carbonfiber matrix. The structured surface of the bottom adds extra strength to the overall shell construction and enables us to reduce the layup of the carbonfiber matrix. The result is a lighter shell construction. The Hollow Tube Tedchnology™ can also be combined with our SKELETON CONCEPT™, which has been descibed in detail before. The Hollow Tube Technology™ is used on the follwowing inline (and ice) racing shoes: Powerslide: C2 Powerslide Ice: M1 Core Racing Ice: Triple X
Powerslide FAQs
7
Universal Flap System The buckle is usually placed on the outside of a todays modern racing shoe. During a fall the buckle can be either hevily damaged or even rip off and need to be replaced. The Universal Flap System now enables the skater to chose his prefered position for the buckle. He can place it on the outside as common or on top of the flap. The antirivets on the flap are hidden by a rubber logo which simply needs to be taken away for assembly. The Universal Flap System is used on the following racing shoes: Powerslide: C4, C4 Pure, C8 Core Racing: Triple X, Triple X Pure
Powerslide FAQs
8
1. Which Model to choose? You can spend a tremendous amount of money for speed skates. It’s the same situation you will find in the bike business. There are cruiser to high-tech racing bikes. Speed skates are high-tech sports equipment used to reach maximum speeds, whether it is in competition or for a personal best. Manufacturers try hard to produce the lightest weight boots/skates in order to gain better results in the competitions, and it is no wonder that this kind of equipment has its price. Take your time and try different models of speed skates before buying a pair - it is worth it. Most distributors offer consignment to their dealers for two pairs of skates in order to find the right sizes for their customer. Each brand has a different last/fit; there is nothing worse than buying a speed skate that does not fit. Entry level speed skater or ambitious fitness skater The number of ambitious fitness skaters is increasing each year, Berlin Marathon is proof of that. Skaters who are used to fitness skates with a high cuff, soft and comfortable padded boots should try a 5-wheel skate with a high cuff first. The high cuff supports the ankle and gives the skater a secure feeling. Almost all companies who offer speed skates carry at least one model of this category in their line. There are also speed skates with a slightly higher cuff. Sometimes it’s not really obvious, but one centimetre of difference in height can give a lot more support to the skater’s ankle and helps the muscles adjust to the new skating technique. A fitness skater should be aware that the muscular system has to get used to flat skates first. Usually that this CAN take a couple 100 km´s or a couple of weeks depending on the intensity of skating. The fit of speed skates is a critical topic. The foot should fit tightly in the boot in order to avoid losing energy on every stroke, along with preventing blisters or similar injuries of the foot. However, a really narrow boot can cause serious problems with painful bone spurs. That example should make clear how important it is to try the boot before you buy it. Painful pressure or even numb toes after a few minutes of wearing speed boots are signs of not properly fitted boots. It’s not easy to find a 100% perfect fitting speed boot. There exists the possibility to heat-mould a boot, adjusting the boot to each individuals´ anatomically shaped foot. I will touch more on this later. Ambitious- or top-skater This group prefers a low-cut boot. The low construction gives the skater freedom of movement in the ankle region and allows the skater to skate with the optimal skating technique (known as double push). Usually the shells of speed skates are made of carbonfiber. Carbonfiber is lightweight and stiff, but not easy to produce. Added fibreglass or extra layers of carbonfiber will reinforce the shell construction in exposed areas and will result in higher stiffness of the boot. The upper material of speed boots is made of real leather, synthetic leather or microfiber materials. The liner is made of leather, micofiber or neoprene material. Powerslide is the first company to offer a high performance speed boot made of synthetic materials such as fiberglass reinforced nylon or other composites. The material will be injected into a mould which guarantees 100% accurate production of each pair of boots. The stiffness of the boot depends on the percentage of fibreglass used in the material mix. There are synthetic material
Powerslide FAQs
9
combination that belongs to the polyamides, which means that this material is also heat mouldable. The temperature for certain material mixes in the oven is slightly higher than carbon and it takes a bit more time to get the material flexible. The performance of a synthetic boot compared with a carbonfiber boot is the same. Advantage of the synthetic boot; there are millions of different synthetics to choose from, improving fit, comfort and performance. Injection-moulding provides consistent quality shells while giving manufacturing and R&D department a large range of flexibility to improve fit, weight, cosmetics and ultimately, performance. Just as important is the favourable price saving of injection moulded synthetics. The past years have proven that Powerslide composite racing shoes are a serious competitor no matter which kind of level they have been used. The prejudices against synthetic materials have been refuted during the years through the success of the skates. You can see skates featuring shells made of synthetic materials even at World Championships.
Powerslide FAQs
10
2. Carbonfiber vs. Synthetic Materials There are a lot of prejudices against synthetic materials. But most of the people have no idea about synthetic materials in general, their potential or about the manufacturing of synthetic materials. The following list shows you the positive and negative aspects of both materials.
Weight Heat mouldable Stiffness of material Flexibility of material Durability against breakage Reproduction of same quality Option for custom manufacturing Design options Options on design (cut) of shell Variation of materials Recycling of material (environment) Pre-investment for production Price of finished product
Synthetic Carbonfiber materials materials +1) ++ O2) +3) ++ ++ ++ + ++ ++ ++ ++4 ++ ++ +5 ++ +5 ++ + ++ ++ +++
+6
1) Weight of synthetic materials varies by material choice, thickness, etc. However, you have the chance to reduce weight with cut-outs (Skeleton Concept™). 2) The temperature is higher (100-120 degree Celsius) and the boot has to stay in the oven for a longer time (10-15 minutes). The moulding temperature for certain material mixes is even higher, which makes it impossible to heat mould the shells in the practice 3) Carbonfiber itself is not heat mouldable. You need thermo sheets. Exception: Boots featuring the new SHMR Technology which is used in Powerslide, Core and Luigino carbon racing shoes 4) New technologies in the manufacturing of carbon fiber materials also guarantee 100% accuracy in the production of the shells 5) New technologies allow to create new shell designs in carbon fiber as well 6) New manufacturing technologies reduce the differences in price between composite shells and carbon shells
Below you can find an overview which kind of material we use for the shell construction of our Powerslide and Core Racing collection. Composite Schale Powerslide R2, R2 Kids, R4 Core Racing 1 2
Carbon Schale1 Powerslide C2, C4, C4 Pure, C62, C6 Pure2, C6 Junior2, C82 Core Racing Triple X, Triple X Pure, Icon, Icon Air
SHMR technology used in all models listed below shell made of Fiberglass
Powerslide FAQs
11
3. Which Size do I need? Our carbon shoes have the same fit as a regular sports shoe. We have made the experience that all our shoes fit the regular shoe size in most cases. The last of the R-series (boots feat. the composite shell) is slightly wider compared to the carbon shoes from Powerslide and Core Racing. All our lasts seem to fit a lot of skaters from our experience. We call it the “race ready fit”, which means the time to get used to the fit of our racing shoes is extremely short.
4. Does Powerslide offer full size boots only? The list below converts European size standard into US standard and Mondo Point. Our production is based on the list. Europe
USA
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
14,5 2 3 4 4,5 5,5 6 7 7,5 8,5 9 10 10,5 11,5 12,5 13 14 15 15,5
Mondo Point (cm) 20,5 21,0 21,5 22,0 22,5 23,5 24,0 25,0 25,5 26,5 27,0 28,0 28,5 29,5 30,5 31,0 32,0 33,0 33,5
5. I have oversized feet. Where can I get shoes? Powerslide now offers the C4 boot up to size 50 (EU) / 15,5 (US)! Please note that we charge a little higher price for the oversized boots. Please check the price with your local distributor or shop.
6. I have small feet. Which sizes offer the 195mm mounting distance? Starting from size 37 EU / 5,5 US Powerslide and Core Racing offer the 195mm mounting distance. We will also try to offer the 195mm mounting starting with size 36 EU / 4,5 US, but this is not finished yet.
Powerslide FAQs
12
7. Which model to choose for wider feet? Powerslide and Core Racing shoes are well known for their great fit. But even the different lasts we used in the past havn´t been perfect. We spend about 1 year of time to improve our various lasts that are used in our shoe collection in order to be able to serve different target groups of skaters. • “Speed” Last Skaters coming from fitness and recreational skating are used to a soft paded, comfortable high cut skate. The last for this group is slighly wider but still has a nice snug fit to transfer the power of each stroke without big loss of energy. Also skaters with a wider foot will love the fit of these boots. There are top skaters that participated at world championships using boots were this last has been used. This last is used in the following models: Powerslide: R2, R4 • “Race” Last Speedskater who practice on a regular base and who join competitions prefer a more narow fit. The last for this kind of skaters is more performance driven. Also skaters will more narrow feet will find their favourite model in this category. This last is used in the followong models: Powerslide: C6 (165mm mounting) • “Performance” Last Pros or skaters with narro feet will like the fit of this last. 100% power transfer is guaranteed! Although the last is quite narrow the choice of high tech materials and the extraordinary padding is giving the racing shoes using this last an incredible fit. This last is used in the followong models: Core Racing: Triple X, Triple X Pure, Icon und Icon Air Powerslide: C2, C4, C4 Pure, C6 (195mm), C6 Pure and C8 Important Note! The new improved heat mouldability of our carbonfiber racing shoes helps to improve the fit of our standard boots to adapt it to the anatomically shaped foot. The diversification and assignment of lasts to specific target groups is just a rough information. We recommend to test the fit of various skate models in your favourite skating shop before purchasing a racing shoe.
Powerslide FAQs
13
8. Which racing shoe is the best for my purpose? It´s impossible to give a general advise which boot to purchase. There are too many different influences like the last for example. Once again we would like to repeat that we recommend to test several racing shoes in the shop or at skating events. The following table does list the boots for certain purposes. You will find some models in more than one category.
Target Group Kids Clubs Low Budget Beginner Marathon Top Skater Woman Inline Alpin
Model Powerslide: R2 Kids (adjustable), C6 Kids (double sizing) Powerslide: R2, R2 Kids, C4, C4 Pure, C6, C6 Pure, C6 Kids Powerslide: R2, R2 Kids, C4, C4 Pure, C6, C6 Pure, C6 Kids Powerslide: R2, R4, C4, C4 Pure, C6, C6 Pure, C8 Powerslide: R2, R4, C2, C4, C4 Pure, C6, C6 Pure, C8 Core Racing: Triple X, Triple X Pure, Icon, Icon Air Powerslide: C2, C4, C4 Pure, C6, C6 Pure Core Racing: Triple X, Triple X Pure, Icon, Icon Air Powerslide: C4 Pure, C6 Pure Core Racing: Triple X Pure Powerslide: R4, C8
9. How to heat mould my skates? There are two options to heat mould your skate which are described below. With an industrial drier Point the drier to the ankle region or the region you have problems. Heat both inside and outside slowly and thoroughly. Be sure to keep a safe distance from the material to avoid damage on the material by overheating or burning. Check the flex of the material from time to time (be careful, the material will be hot). Put the shoe on and tighten firmly. Get into the skating position and wait until the material has cooled down. You can speed up the cool down process by wrapping some wet towels around the boots or by using ice spray. In the oven: Pre-heat the oven around 90 degrees Celsius. Put boot including mounted frame (without wheels!) into the middle of the oven away from all elements. Check the flex after 5 minutes and than each minute until you have the feeling the shell is flexible enough. Take the boot out of the oven and follow the instructions mentioned above. The temperature of the oven is a little higher if you want to heat mould synthetic boots like the R2, R4 or S3 from Powerslide. Please choose around 110 degree Celsius to heat the boot up. The first flex-check should be made after approximately 10 minutes and then each minute. Take the boot out of the oven once the material is flexible enough and follow the steps as mentioned above.
Powerslide FAQs
14
Attention Boots are hot when they come out of the oven! Powerslide recommends to wear socks and gloves when heat moulding synthetic boots. You also might step out of the boot after a very short time to let the material cool down before trying it again. You may have to repeat the procedure to get the correct fit. Important Notice: We recommend to adjust the fit of your racing shoes in sitting position! But please be aware to get into the correct skating position. NEVER stand with full weight on your boots when adjusting especially if you purchased a pair or racing shoes featuring the SHMR-Technology™. The mounting block could be moved out of position if the impact is high enough, because the entire shell is heat mouldable. This would influence the boot- frame set up and can cause problems. Yo must be aware the warranty expires if you did not follow our instructions.
10. Which speed boots are heat mouldable? Almost all manufacturers offer heat mouldable speed boots. Please ask your local dealer or the manufacturer if he uses so called “thermo sheets” on the carbonfiber boots. Remember, carbonfiber itself is not heat mouldable. The boot is not heat mouldable without a layer of this material. An exception is the new SHMR Technology used in the Powerslide and Core Racing carbonfiber shoes.
11. How often can I repeat to heat mould my boots? You can do it as often as you want with the SHMR technology. Thermo sheets start to get weak after several times. We recommend to heat mould only as often as necessary. It might make sence to think about custom boots if you can not stop the fit problems even through heat moulding.
12. What is the mounting distance of your boots? The following chart will give you an overview of: 1. models devided by mounting distance 2. models devided by type of mounting block 165mm Powerslide R2 Kids, C6, C6 Kids, R21, R41
Core Racing
195mm Powerslide R2, R4, C2, C4, C4 Pure2, C6, C6 Pure2, C8 Core Racing Triple X, Triple X Pure2, Icon, Icon Air
1 size 37 and 38 only. Bigger sizes feature 195mm mounting distance 2 starting with size 37 EU / 5,5 US!
Powerslide FAQs
1-1 Powerslide R2 Kids
Core Racing
15
X-Slot Powerslide R2, R4, C2, C4, C4 Pure, C6, C6 Pure, C8 Core Racing Triple X, Triple X Pure, Icon, Icon Air
13. What kind of boot-frame set ups do you offer? The chart below is listening the different boot and frame combinations that we offer in our speed collection 2008. Frame Core Racing Icon Schiene 13,1” 4x110mm along or across 195mm 12,8” 3x110mm/1x100mm along or across 195mm
Core Racing Triple X Schiene 13,3“ / 4x110mm along or across 195mm 12,8“ / 3x110mm/1x100mm along or across 195mm 13,3“ / 4x100mm along or across 195mm
12,8” / 4x100mm along or across 195mm
12,8” / 3x100mm/1x90mm along or across 195mm
12,4” / 4x100mm along or across 195mm
Powerslide Double X Schienen 13,3” / 4x110mm along or across 195mm
Boot R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Other brands Custom Boots R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Other brands Custom Boots R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Other brands Custom Boots R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air
Powerslide FAQs
12,8” / 3x100mm/1x90mm along or across 195mm 12,8” / 3x100mm/1x90mm 165mm + 195mm (2 in 1) 10,25” / 3x100mm 150mm / 165mm (2 in 1) Powerslide Venom Schienen 14,33” / 5x90mm 165mm 13,33” / 5x84mm 165mm + 195mm (2 in 1) 13,0” / 4x100mm 195mm 13,0” / 4x100mm along or across 195mm 12,8” / 3x100mm/1x90mm 165mm + 195mm (2 in 1) 12,8” / 4x90mm 165mm + 195mm (2 in 1) 12,0” / 4x100mm 165mm + 195mm (2 in 1) 11,6” / 4x90mm 165mm + 195mm (2 in 1) 10,25” / 4x84mm 150mm + 165mm (2 in 1) Powerslide V-Type 13,3“ 4x100mm 165mm Powerslide Hawk 10,8“ 4x90mm 195mm
16 Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2 Kids, C6 Kids Other brands C6 Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8 Triple X, Triple X Pure, Icon, Icon Air Custom Boots featuring X-Slot-System R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands R2 Kids, C6 Kids Other brands C6 Other brands R2, R4 C2, C4, C4 Pure, C6, C6 Pure, C8, Triple X, Triple X Pure, Icon, Icon Air Other brands
Powerslide FAQs
17
Frames featuring the new X-Slot System can be combined with regular shoe mounting systems and vice versa a frame with regular mounting system can be mixed up with shoes featuring side slots. The individual adjustment of the shoe – frame set up is limited in both cases Frames with 195mm X-Slot Mounting System are not compatible with 165mm mounting standard!
14. Does Powerslide offer custom boots? Unfortunately we had to cancel the project to offer custom boots „Made in Mermany“ due to family affairs of the shoemaker. A solution was found quickly. Powerslide came to an agreement with Sergio Mc Cargo from Argentinia. Sergio is in business for a long time serving top athletes in South America and world wide with precisious custom boots. Sergio´s skating career Bio: He started skating when he was five years old. And quit racing at the age of 27. Sergio was member of the Argentinian national speedskating team from 1987 to 1997and participated at 10 world championships where he won 3 times bronce. Sergio´s business career Bio: Sergio made his first steps in the production of sporting goods materials at the same time as his internship for the final years of his studies. He worked for a skate manufacturer in the production of 4 wheel quad frames. In 1992 the first inline skates could be found at competitions. Furthermore the specialization in reinforced composite and carbonfiber materials started. That was the time when Sergio opened his own business offering carbonfiber race boots. Sergio was hired by PRO in 1999 and moved to italy to build up the production for carbonfiber speedskates. He had close contact to top athletes on inline and on ice during his time in Italy and has been able to develop and improve his knowledege about production and materials step by step. Sergio made a lot of custom boots for top athletes around the world brnging it to perfection. With this goal in mind he went back to Argentina in 2005 where he opened an exclusive laboratory for the custom boot production. Sergio is proud member of the Powerslide family serving skaters with high end custom boots world wide. All members of the Powerslide 2008 world- and national teams skate on boots from sergio Mc Cargo.
15. Where can I get my casts made? Powerslide will offer custom boot service at several national and international speedskating events through Jose Altiveros (former owner of E-Motion Sport) and Jürgen Pfitzner (Powerslide) as well as through Powerslide pro shops. You can get in touch with us through Jürgen Pfitzner in order to arrange a meeting. The e-mail adress is:
[email protected].
Powerslide FAQs
18
16. Where can I get a cast for my custom boot (world wide)? We recommend to contact your local Powerslide/Core distributor for more information. They can help you for sure. Or just call speedskating shops in your country to try to find out where to get your cast. Please contact the Powerslide headquarter in case you need a hand in this matter. We will be pleased to find the right contact for you in this matter. You could also ask other custom boot maker that you might meet at an event to make a cast for you. Usually they calculate around 50,- EUR for a cast which you just send to our office. Some shops are also specialized in custom boots and mght be able to take a cast from you.
17. Does Powerslide offer a 3-D foot scan? Custom boot manufacturing has a long history not only in speed skating. The shoe manufacturers spend a lot of time and money into R&D to develop 3-D foot scanner to simplify and improve the procedure of taking the cast from the consumer. It was a question of time when this development would find it´s way into speedskating. The glamourus brochure promises a perfect result. 320.000 measure points should provide an exact copy of the foot. But is the 3-D foot scan THE solution to get the perfect custom boot? Powerslide started it´s own R&D at the beginning of 2006. WE contacted a few companies to collect information about the devices they offer. The differences among the offers we received are quite big and it was not easy to compare the different systems. One difference is the software which obviously all the scanners have to have. Some companies already include the software into the package, some just don´t and you have to purchase an extra package. You also need a second software which helps you to transfer the datas of the foot to create a last by CNC machining. The software s pretty expensive and prices vary a lot. We recommend to test the software that you are interested in first before making a buying decision. Lightbeam offers an interesting solution which Powerslide tested for several weeks. The data collection will be send via internet directly to the headquarter of the coompany. You per a certain rate per pair of scan depending on the quantity of scans per month. Lightbeam checks every incoming scan and calls the client in case they have the feeling that the client makes mistakes when using the device. For sure they can not check if the scan itself has any problems. That belongs to the responsibility of the client. We started the field testing with the Lightbeam 360° 3-D foot scanner We took the opportunity to take scans from all our sponsored skaters. The handling of the device is pretty simple and didn´t make any problems. The client has to wear a special sock (2,20 EUR / pair), which is kind of reference for the device in order to copy the foot. The athlete had to stay in natural skating position for about 20 sekonds and could not sit on a chair due to the special construction of the foot scanner. That´s the approx. time the scanner need to take a 360° scan of the foot to collect all 320.000 measure points. Twenty sekonds can be very long… We had to repeat the procedure with some clients for a second time in order to get good results. But we have been satisfied with the results in most of
Powerslide FAQs
19
the cases. The device tself had to be rebouted sometimes for some reasons, but even this was not a big deal. BUT: You would fail if you believe that this is all to get a perfect custom boot! Yes, you have the 320.000 measure points and we should expect to get the best result. The question is if you could reach a similr result with the traditional casting by using plaster. The scanner has for sure some advantages. The procedure to get the copy is much faster and cleaner, but traditional hand craftmanship also has it´s advantages. You can “feel” and see the individual anatomical specials of the clients foot. You spend much more time with the foot and the client which can be used for consultations and to collect information from the athlete. A customer who spends around 1.000 EUR for a pair of custom boots expects an extensive consultation. Good copy or bad copy – the most important point in the end is the capability of the shoemaker himself! You can receive a bad fitting custom boot if the shoemaker is not able to use the data for the manufacturing of the boot. EVERY last, no matter if it´s a result of a 3-D scan or handmade, needs to be reworked by the shoemaker. You can not just tale a scan 1:1 and try to build a shoe. Thias will fail for sure. The shoe construction itself with the inside lining the padding or other orthopedic features has to be considered as well into the shoe manufacturing. This is the point where you will find the differences between good shoemakers with a lot of experiences and bad shoemakers who just trust the technology behind it. Our field testing with the Powerslide skaters has not been finished yet and we are not able to send a final report up to now. We took a cast of all our skaters by 3-D scan AND by traditional plaster casting. The shoes for the athletes will be made based on one or the other methode. No one of the skaters will be informed if their boot is made on the base of a 3-D scan or the traditional way until we have their feedback. Be patient. We will send the results as soon as we got them. Generel Summary: We might stay with good old craftmanship although the field testing has not been finished yet completely. Reason 1: The work on the last itself and the shoe manufacturing is handiwork, no matter how exactly the copy of the foot is. The experience of the shoemaker is the most important part of the puzzle without doubt and not the methode of taking a copy. Reason 2: Taking a cast by plaster takes much more time than by 3-D scan. But this also generates a great chance to be in close contact with the althletes feet on one side and the athlete itself. The shoemaker can use the time for consultations and to get information for individual preferences and wishes from the customer side. We think it´s not asking too much for a 1.000 EUR custom boot, right?
Powerslide FAQs
20
18. Which frame fits to my speed skate? The industry is working with different standards at the moment. Usually the standard for the mounting distance of boots and frames was 165mm (6,5 in.). With the lounch of 100mm frame set ups the mounting distance has been enlarged to 190mm or 195mm (9,5 in.) in order to get the gravity point more down. It seems that the 195mm distance is the most common standard in the industry besides the old one. Please make sure to check your boot-frame-compatibility carefully before purchasing a new set up. 4x100mm frame set ups with 165mm mounting distance will be still offered for those skaters out there who do not want to change boots and frames in one time. It will be interesting to see if the industry will be able to reach an agreement to offer only one certain mounting system in the future like they did in aggressive skating with the UFS-system. This will avoid confusion for the consumer and wil also make it more easy for the shop owners. Kids should start with a 4-wheel frame which allows them to learn the appropriate skating technique. It might be an advantage for fitness skaters to start with a 4-wheel frame for the same reasons. Four wheels may also help to get use to speed skates coming from standard fitness skates. Since 2007 3x100mm set ups can be seen in the market and seem to be quite popular especially in the USA and other countries. Female skaters often prefer a slightly shorter frame, like 12,4” or shorter. Both, 4x 90mm and 4x 100mm set ups have been successfully tested in the past by female skaters. But also more and more female skater can be seen on 110mm wheels. They prfer the shorter version with the 3x110mm / 1x100mm wheel setup.
19. What are the differences between the various frames? The material of the frames is the first difference among the various models. Most of the frames are made of aluminium. Another, even more lightweight, alternative is magnesium or carbonfiber. Magnesium is about 30% lighter than aluminium. Carbonfiber frames are not very popular and could not outperform the aluminium frames so far. Also magnesium frames seem to have performance problems and can hardly be found. Frames made of synthetic materials failed in speedskating because a lot of energy was absorbed by the frame which results in slow speeds during skating. The aluminium frames can be divided into the 6000 series and the 7000 series. The last one mentioned is of higher quality. Another difference is the construction of the frames. Frames with a bridge between the wheel are called “double voided” frames. The bridges give additional support for the frame against torsion, etc. The frame is stiffer and transfers more power into speed than regular frames. Frames without these bridges are called single voided frames. But there are also frame designs like the TRIPLE X frame or the ICON frame from Core Racing that are also very stiff although they do not build like a double voided construction.
Powerslide FAQs
21
20. What does the marking „Ø100 / M7“ stand for on my frame? You will find this marking near the axle holes on your Powerslide or Core Racing frames. It gives you some simple information like following: Ø 100 – The information indicates the max. wheel size that can be used at this position of your frame - in this case max. 100mm wheels. M7
– This information indicates the standard we use for the axles. There are many brands in the market offering speedframes and not all use the same standard. This simple information on our frames helps you to order the correct axles in case they might got lost or need to be exchanged for some reasons.
21. Do you have a frame chart showing the most important datas of your frame collection? All current offered speed frames from Core Racing and Powerslide are listed in the frame chart below. We collected the following information for you • • • • Frame
Set Up of frame – which size and number of wheels can be used on the frame Weight of frame Hight of frame front and rear Purpose of frame (standard recommendations – purpose might vary for some skaters!)
Length
Wheels
Mounting
Double Weight Void
Hight front
Hight rear
Marathon Track Allround Women Men Kids
13,3” 12,8”
4x110 3x110/1x100
195mm 195mm
233g 194g
105mm 116mm 95mm 106mm
X X
X X
X X
13,3 12,8 13,3 12,8
4x110 3x110/1x100 4x100 4x100
195mm 195mm 195mm 195mm
234g 221g 218g 212g
105mm 105mm 95mm 95mm
116mm 116mm 106mm 106mm
X X X X
X X X X
X X X X
13,3 12,8 10,25
4x110 3x100/1x90 3x100
195mm 195mm 150mm/165mm
225g 193g 186g
107mm 118mm 95mm 106mm 95mm 106mm
X
X X
X X
10,25 11,6 12,8 12,8 13 13,33
4x84 4x90 4x90 3x100/1x90 4x100 5x84
150mm/165mm 165mm/195mm 165mm/195mm 165mm/195mm 195mm 165mm/195mm
X X X X X X
181g 206g 210g 212g 216g 215g
91mm 95mm 96mm 97mm 97mm 91mm
102mm 106mm 107mm 108mm 108mm 102mm
X X X X
X X X X X X
X X X X X X
10,8
4x90
165mm
X
170g
85mm
96mm
X
X
X
X
12,8
3x100/1x90
165mm
X
246g
101mm 112mm
X
X
X
X
Icon X
X X
X
X X X X
X
X
TripleX
DoubleX
X
Venom X X X X X
X X X X
Hawk V-type
X X X
Powerslide FAQs
22
22. Which frame set u do you recommend for my competition? This is a very dificult question. We are not able to give you a specific answer, because the choice of a specific frame set up depends on various points. The type of track or the profile of the course, the condition of the surface, your physical conditions, or even the competitors can influence your choice. For sure skaters with really small feet will have problems to handle large frames and if they can from technical standpoint they might have problems because of their physical strength. We recommend to test different frame set ups. Skaters belonging to a race club often switch frames among each other to check out their personal fevourite frame set up. You also might have friends who skate a different set up to test them. Athletes might have different frames for track and road competitions. Some will never change their system. It´s up to you to make the decision. 100mm wheels dominate the race szene since 2004 and 5 wheel set ups lost the battle against 4 wheels. Now even 110mm wheels have been tested succesfully and gaining momentum. Kalon Dobbin made history with 110mm wheels in 2007 and 2008. He was the first skater in the history of inline skating who got disqualified after the competition for using oversized wheels. He did it for purpose at NZN nationals 2006/07 in order to test 110mm wheels under race conditions. Than one year later Kalon was the first skater ever winning a national title on 110mm wheels (200m T/T at NZN nationals 2007/08 end of December 2007). History repeats itself. The big question is where is the limit? Skaters around the world tested even bigger wheels up to 125mm. The 4x110mm set up wasn´t too successful in the past because of the weight of the wheels. Matter was able to reduce the weight of oversized wheels and makes it interesting again to take a deeper look into 110mm wheel combo´s. The question is who will be the first one showing up with even bigger size wheels at competition level. Naturally the skaters also test 3x110mm / 1x100mm set ups and other options to get the boot as low to the ground as possible. This combo was really successful in 2008 with Yann Guyader winning gold at worlds, Europeans, being No One in the WIC ranking and winning the FIC and SIC overall and other top races in just one year. Female skaters are also quite successful with short 4x100mm frame like 12,0” and 12,4” length but also switched to 110mm or 3x110mm / 1x100mm set ups as mentioned before. Again, it´s up to the individual preferences of the athlete which frame – wheel set up to choose no matter if male or female skater. But for sure this development doesn´t make it easier for the skater to chose the right frame. The international speedskating federation (FIRS) now changed the rules and legalized 110mm wheels. Natinal federations will follow now, which makes it easier now for the skaters world wide to follow the rules in the competitions.
Powerslide FAQs
23
23. 4 wheels or 5 wheels – what´s better? From physical standpoint 5 wheels should be faster than 4 wheels. The reason is that the weight of the skater will be shared among 5 wheels instead of just 4 which reduces the rolling resistance of each wheel. A 5 wheel frame is rolling more smooth than a 4 wheel frame and has more grip in the corners, because of the footprint. The fotprint is the contact area of the wheel with the surface. The more wheels you have the bigger the footprint and the better the grip. But this question is just theoretical now since 4 wheel set ups took over the race scene by storm. It´s a nice rolling once the 100mm or 110mm setup is on speed. It´s more easy to keep up with high speed and you safe energy during the race. Break aways or ascents are not “110mm-frindly”. But the complete elite changed to 110mm and all skaters have to deal with the same (dis-) advantages. Kids and juniors also use 100mm wheels now. The kids prefer 3 wheel set ups due to the weight issue. Juniors switch to 4x 100mm wheels. Our general advise is to contact your coaches for help to find out if switching to oversized wheels makes sence or not. Koordinative skills and the skating technique are important factors and should be considered well before making any decision especially for growing childs. There is alwlays room in the market for all different kind of set ups. The skater should choose the one he can handle the best from physical point of view as well as having the skating skills in mind.
24. What kind of axles fit to my frame? Powerslide uses M6 axles on most of the frames right now, but will change to M7 axles in the future. Please check carefully if Powerslide axles fit your frame if you consider to purchase an aftermarket set. The axels have a diameter of 8mm and will not fit fitness skates. Powerslide also changed all mounting screws and axles for their speedskates and frames from regular hex system to the “star” or torx system. The hex system is quite weak and easy to get stripped.
25. How to position my frame The position of the frame depends on the individual technique and each skaters personal preferance. Center: In most cases skaters choose to mount the frame centered under the boot. Entry level speed skaters should place the frame in this position or slightly inwards. Center of foot is the middle of your heal and between your first and second toe. Only looking at the bottom of the boot can be deceiving and every brand is a bit different, but your toes are always the same. centered to inside: This position helps to set the skate towards the outside edge of the wheels. The stroke will be longer and can assist in getting outside edges (helps to skate the double push technique). Positioning of frame forward or backward It’s the same procedure. The position of the frame depends on the individual skills and personal preferences.
Powerslide FAQs
24
General rule is center wheel in the middle of your boot (similar distance in front and back). This gives an even push from beginning to end of the stroke. Assembling of boots: You need the following items: Two screws including washer • • • •
Make sure the screws are tightened firmly to make sure you will not loose them during skating. Rattling noises will be a sign for screws that start to get loose. You can use a snap ring, which you will find in every do-it-yourself store, if your frame gets loose although you´ve tightened the screws firmly. You can also use „Loktide“ or „Nylok“ on the screws to prevent them from getting loose.
26. Which wheel to choose? The choice of wheels varies a lot and depends on many factors. Top skaters change their wheels from race to race to get the best combination of wheel type, sizes and hardness for maximum roll, grip and overall performance. The wheel size of speed skates varies between 80mm and 100mm (accepted by the rulebook of the FIRS). Notes concerning the size of wheels: Bigger wheels are slower in the acceleration, but faster in the top speed. Smaller wheels react vice versa. There are no facts yet regarding the trade off for acceleration of 84 vs. the roll of 100mm. The hardness of wheels is measured in durometer “A”. Fitness and speed wheels come in a middle range hardness of 81 to 85 A. The hardness of a wheel has a lot of influence on the rolling performance. Notes concerning the hardness of wheels: Soft wheels absorb impacts better but do not roll as fast. Harder wheels are faster but do not absorb impacts as good as the softer ones. The profile of the wheel is flat-to-pointed related to the use of the skates. Speed skating wheels are pointed. Notes about the wheel profile: The more pointed the wheel, the less the rolling resistance (= higher speed), but smaller the stability.
Powerslide FAQs
25
Rules for the hardness of wheels: The smoother the surface Î the harder the wheel The harder the wheel Î the more durable the wheel (wear off) The softer the wheel Î the better the shock absorption and grip Extreme rough surface Î 78A – 80 A Normal surface Î 80A – 83A Smooth surface Î 83A – 85A and harder
27. What´s different on Matter Race Wheels? Simply said – everything. Matter wheels have been created by Neal Piper, one of the best chemists in the industry. He has been in business for almost 2 decades and has designed the Hyper race chemistries in the past. It was time for a change and Neal decided to go his own way to come up with new ideas and concepts. One of the biggest advantages of the Matter wheels is the weight. Matter wheels are about 16% lighter than regular wheels due to the hollow hub construction.
Each wheel size has it´s own hub design for the perfect combination of hub size and urethan. Neal created urethan mixtures for different surfaces. Gripy ones but still with a lot of speed for very slippery tracks, wheels for indoor competitions or “just fast” wheels for road races. Test the wheels by yourself to get an idea of the differences.
28. Why do Matter Race Wheels came up with Footprint? The footprint is more important than the hardness of a wheel. The footprint is the compression size of a wheel. In other words the amount of the wheel making contact with the surface yu skate on. The footprint changes per someones weight, speed or temperature and becomes even more important when you are on the side of the wheel in the turns or skating the double push technique. The smaller the footprint, the harder the wheel.
Powerslide FAQs
26
29. How do I read the code on the Matter Race wheels? The code on the wheels contains a mix of letters and numbers giving various informations about the wheel. Let´s take an example: F184rsc F = Footprint F0/F1 /F2 /F3/F4 = hardness of wheel or footprint The number behind the footprint is the wheel size Example: F184 = 84mm wheel The last letter indicates the special use of the wheel r = road t = track i = indoor sc = solid core Going back to the example above: We have an 84mm road wheel with solid core and a hardness of footprint 1 (hard). Quite simple, isn´t it?
30. What´s the technology behind Matter Wheels? One important feature is the core of the wheel. Matter offers a unique hollow core technology. One advantage is the reduction of the overall weight of the wheel. Another advantage of the core construction is the aerodynamic. Bigger wheels often have problems with air turbulences which results in a commotion role of the wheel. The closed core of the Matter wheels prevents the wheel from air turbulences. Some companies try to solve the problem with carbon or composite shields for the hub, but gain more weight again.. The extreme grip is another advantage of Matter wheels. The unique PU compounds allowe the athlete to skate with full power keeping the maximum speed. Powerfull sprints, extreme curves or slippery floors are no problem with Matter wheels. Get a grip!
31. What is Ultrasonic Welding? Ultrasonic welding is the method of joining two parts by converting electrical energy into heat energy by high frequency mechanical vibration and is suitable for plastics or metals. One part of the assembly is set in motion in order to cause intense friction between the two pieces, one of which remains held in place. This movement is provided by a vibrating component called a sonotrode which is applied at right angles to the surface of the part to be welded.
Powerslide FAQs
27
Friction is localized at the interface of the assembly. The resulting heat quickly melts the plastic which flows and causes a chemical bond. After it has cooled, a solid homogeneous weld between the two components is formed. The vibration frequency of the sonotrode is 20 to 40 kHz which is outside the perception limit of the human ear. Ultrasonic plastics’ welding has advantages: One piece Hollow Core Technology (HCT) promotes a stiffer more consistent roll to assist in reaching sub 8 second laps Indoor. In addition, ultrasonic allows us to keep our HCT while developing an entirely new Energy Management Technology system (EMT). This is a breakthrough for elite inline racing because it is the first ever hollow core with energy management control, giving back nearly all the energy put in. Not only does Matter have superior urethane, we also understand the importance of making the urethane and core work coherently in order to optimize roll, grip, wear and overall performance for indoor, road, track and marathon racing.
32. What does EMT mean? EMT is a proprietary technology which has proven to work in several other sport applications such as road and mountain cycling, skiing and golf. To keep it simple, hard/stiff materials provide more rebound than soft/squishy materials. There is more energy bundled into hard materials than softer materials. There are hard Urethane’s which provide up to 25% more than soft. The Ultimate advantage is our ability to manage the energy to give specific foot prints and flex without sacrificing roll, grip and wear. Our Energy Management Technology gives you a better understanding of why Matter out performs its competition 95% of the time. Our ability to manage energy is magnified indoor, outdoor or track. Hold on because Matter is about to break more speed barriers. We are confident that we are only scratching the surface of our Energy Management Technology. We continue to enhance the system through research and design. 2007 brings on a new attitude at Matter improving the performance of all Matter Wheels customized for each discipline and surface. Already in 2007 Matter is proving our EMT works in large wheels and may have magnified advantages as the wheels increases in size. We are still in the proving stages before making any real statements regarding size. What we do know is that our top team skaters including Pascal Brian, Alexis Contin, Kalon Dobbin, Yann Guyader, and the other skaters of the Powerslide Phuzion World Team or the Matter Inline Center World Team swear by 110mm wheels and the trend is quickly catching on. We have tested the wheels througout the entire winter on road, track and even
Powerslide FAQs
28
indoor. Especially Kalon who is kown as a very technical skater gave a lot of input on the development. From all our field test results 110’s have out performed 100’s hands down on track, road and indoor. The overall consensus is faster and more grip. We have witnessed Pascal, Kalon, Yann, Fabio and others doing on 110’s what we thought could not be done. Maybe size does matter; our competitors seem to think so?
33. What´s the X-Blade Hub? The new X-Blade hub is an oversized hub making the wheel even more light weight as it is right now. This also means we use less PU. The weight difference is significant and athletes feel the advantage right away. With the new X-Blade hub Matter wheels offers the most advanced technology in racing wheels combining a light weight wheel with superior grip and roll. The hub is used for the Matter LITE series and 110mm wheel size. We are proud to have the lightest 100mm and 110mm wheel in the market.
34. Does Matter offer wheels for Mini bearings? No, Matter only offers wheels for 608 standard bearings. You have to use bearing sleeves if you want to skate your mini bearings on Matter wheels.
35. Tips for maintenance of wheels Noisy or out-of-round wheels are caused by uneven wear. The inside of the wheels wears off faster than the outside. Regular rotation of wheels helps to maintain the life and to stabilizes the wheel during skating. Please follow the steps to maintain your wheels: skating on 4 wheels position 1 left to position 3 right Position 2 left to position 4 right Position 3 left to position 1 right Position 4 left to position 2 right And vice versa. The print of the wheel should face to the outside. Skating on 5 wheels position 1 left to position 4 right Position 2 left to position 5 right Position 3 left to position 3 right Position 4 left to position 1 right Position 5 left to position 2 right And vice versa. The print of the wheels should face to the outside.
Powerslide FAQs
29
36. Which kind of bearings to use? Bearings are the heart of the skates. Quality of skate bearings varies allot. The so called ABEC rating (Annular Bearing Engineering Committee) is the usual sign for the quality of bearings. The ABEC rating represents the production standard, concerning accuracy and tolerance of the bearings. Usually you divide between ABEC 1, 3, 5 or 7 bearings. The higher the ABEC rating, the better the quality. Note: It’s possible that a poorly greased ABEC 7 bearing is worse than a well lubricated ABEC I, bearing from a quality point of view. The mark 608 stands for standardization of a manufacturing process. Number 60 represents the production series and the number 8 stands for the inner diameter of the bearing. Fitness skates are usually equipped with 608 bearings. Micro bearings are marked through the number 688. They are smaller and lighter than the 608 bearings. The wheel must have a special hub to fit 688 bearings or the skater must use adapters to fit the bearings properly into wheels with regular 608 hubs. One common material for quality bearings is chrome steel. Some bearings are even made of titanium or ceramic. Ceramic bearings are self lubricated and don’t need as much service as regular greased bearings. Bearings with two metal shields are called ZZ-bearing. They are called Z-bearing if only one shield is used. Be sure to place the open side of the bearing towards the inside when assembling the wheels. Advantage of a half open bearing: Easily serviced Bearings which are characterized with 2RS are dust and water-resistant. The metal shields are covered with rubber, which helps prevent debris from entering the bearing, but will not stop it completely. Meanwhile the first 100% rustproof bearings are on the market. These special coated bearings prevent the bearings from rust while increasing the time period between maintenance. Spacers are located in the wheels between two bearings. They are made out of aluminium, steel or brass, but most of the manufacturers use aluminium. Synthetic spacers are not as good for inline skating and are used in low-end skates only. The entire Powerslide bearing collection may be used for speed skating, but we specifically recommend: 608 bearings (blue package and shield) Orig. SWISS by WIB SWISS Concept PS German Twincam ILQ 7
Powerslide FAQs
30
Twincam ILQ9 ABEC 7 (Fast Spin) Black Rain (for training) Rustproof (for training)
37. Standard or Micro? What should I use? One of the most common questions, is the question which type of bearing the skater should use. Micro bearings (688) or macro bearings ( 608 standard)? 688 bearings have been trendy in speed skating for a while but have been replaced by standard 608 bearings. The smaller bearings do not have advantages compared to 608 standard bearings except weight, and better acceleration. But in the end the performance was not better than 608 standard bearings and the price even higher. 688 advantages: Weight (only 3,4g) 9 balls (for better distribution of the pressure) Better acceleration Disadvantages: It’s not so easy to keep up high speed for long periods of time More susceptible for dust and dirt Not as easy to maintain (smaller parts) 608 advantages: Maintain high speed easily for long periods of time Easy maintenance Large variety 608 disadvantages: More weight compared to 688 bearings
38. Original Swiss bearings or Swiss Copy bearings? The Powerslide swiss bearings are originally made in Switzerland. Other companies offer swiss bearings as well, but most of them are just copied and not made in Switzerland. You can recognize original swiss bearings on the print of the shield. Only bearings with print WIB are made in Switzerland. All other swiss bearings are copied. A Swiss copy is made in Asia. The manufacturer simply copy the construction of the original and use the cheaper labor and production costs to offer a better price. Tests have proven that the Swiss copy bearings can not reach the quality of the Original! BSB, Luigino or other brands offer Swiss copies. They are all made in the same factory in Asia. Powerslide offers both types of bearings. The orignal AND a Swiss Concept bearing. The competition drove us to this decision. It seems that the consumer only cares about price first. The Powerslide Swiss Concept bearings copies are made in the same factory like all other copies on the market.
Powerslide FAQs
31
39. What does ILQ mean? Twincam have been manufacturing “ILQ” bearings for the past few years, they claim them to be superior to ABEC rated bearings. Here I will explain the true meaning of ILQ, and how they relate to ABEC rated bearings. The ABEC rating has been explained above already. ILQ is simply a brand name, as opposed to ABEC which is a standard. Twincame has successfully created the illusion that ILQ is a “standard” by rating their quality on a scale similar to the ABEC scale (ILQ-7 bearings compared to ABEC-7 bearings and so on). Other than the fact that an ILQ bearing has 6 balls, as opposed to the 7 in a regular ABEC rated bearing - Twincam has published no standard for ILQ bearings. We are forced to take their word that ILQ-9 bearings are better than ILQ-7 bearings. A Grain of Truth. Twincam rightfully claim, that a bearing could have a very high ABEC rating - but be terribely unsuitable for skating. A cheap ABEC-9 bearing from an unknown company is probably much worse than an ABEC-3 bearing from a trusted manufacturer. Also, most professional race bearing manufacturers never even apply for an ABEC rating for their high-end bearings. The Bottom Line ILQ in not a standard, it is just a brand name. An “ILQ-7″ Bearing could be better than one companies ABEC-9 rated bearing and it could be worse than a differant companies ABEC-5 rated bearing. Twincam is an experienced and respectable bearing manufacturer who has proven that he managed to produce good quality bearings. You have to test them by yourself to build your own opinion about the quality of ILQ bearings.
40. How to maintain my bearings The first signs to maintain a bearing are noises or heavy spin of bearings. To save some money you should maintain your bearings regularly. Please follow the advice below: • • • • • • •
Disassemble the wheels from the frame Open the shields (if possible) with a needle Place the open bearings in a small container (e.g. turbo wash of Powerslide) that is filled with citrus cleaner or other cleaning liquids. Clean bearings carefully with a toothbrush Dry the cleaned bearings on a towel Grease the dry bearings with synthetic oil or other stuff Close the bearings again and assemble the bearings into the wheels.
Powerslide FAQs
32
Powerslide Care Products Turbo Wash Citrus Cleaner (zum Nachfüllen vom Turbo Wash) PS oil Teflon Lube Teflon oil Grease Injection (with Teflon) Grease Spray Care Set (oil, Cleaner, Y-Tool, Pins, Brush)
41. How often do I have to maintain my bearings? There is no general advise how often you should clean your bearings like there is no information how often you should wash your car. Every skater is different. Some maintain their skates and bearings almost every day, some wait until they loose performance and some just exchange parts. Dust, water and dirt can damage the honed and polished raceways and balls of a bearing and has influence on the performance of the bearing and in the end on the speed of your skates. You can extend the lifetime of your bearings through regular maintainance. Nice side effect – you safe maney. It really depends on many factors how often you should clean your bearings as you can see. But please note that also rustproof bearings need to be maintained. Dust and dirt also damage the raceways and balls of the bearing. The bearing just does not rust. Please note: Always maintain your bearings after skating in wet conditions!!!
42. What is the difference between open and closed bearings? Closed bearings have a shield on both side which helps to prevent the balls and raceways from dust, dirt and water. The shield can be made of metal or can be covered with rubber. Last ones keep of the dust and dirt from the inside a little longer than just metal shields, but are not able to prevent penetration at all. Bearings with labyrinth shields like the Black Rain from Powerslide are even better, but still not perfect. These bearings need to be cleaned as well, but not as regular as bearings with normal shields. Open bearings featuring a one side shield in most of the times. A few skaters prefer to take of both shields. Advantage: The maintainance of the bearing is more easy and faster. Disadvantage: Dust, dirt and water can penetrate much easier and lubricants can escape more easy as well.
Powerslide FAQs
33
43. Are there any rustproof bearings in the market? Yes, there are rustproof bearings. Powerslide offers a 100% rustproof bearing in 608 and 688 standard. Even saltwater can not harm the bearing. But please note that rustproof bearings need maintainance as well!
44. How does the bearing press work? The bearing press is a useful tool for quick change of wheels and bearings. a. taking off bearings • Take off wheels from frame • The lever of the press is in upright or open position • Put the wheel on the little hook of the press • Take off the bearing by pressing down the lever • Follow the same procedure with the rest of the wheels b. put in bearings • The lever of the press is in upright or open position • Put the following items one after another on the little stick of the press (1. first bearing 2. spacer 3. wheel 4. second bearing) • Close the stick again • All parts will be combined when pressing down the lever • Follow the same procedure with the rest of wheels The bearing press from Powerslide is equipped with two different sticks which can be exchanged. One of them is fitting 8mm spacers (for speedskating), the other should be used for fitness skates where 6mm spacers are common. The Powerslide bearing press is fitting 100mm wheels.
45. Which spacers fit my speed skates? Common speed skates are equipped with 8mm axles. This means that 8mm spacers will be needed. There are specific spacers for micro and macro bearings. Some wheels have a slightly wider core, which causes problems. The wheel does not spin freely, due to pressure on the sidewalls of the frame (bearing boss). The pressure must be on the spacer and bearings, not on frame or wheels. In the case of drag with micro bearings, generally the spacers are to small. Look for spacers to be (14,4mm instead of 14,2mm) to avoid the problem. Powerslide offers spacers for micro or macro bearings in 10 packs and 8 packs for 8mm axles (Speed and Salomon) or 6,2mm axles (RB, K2, Roces, etc.)
Powerslide FAQs
34
Spacer - 8mm (Salomon and Speedskates) 608: 10ea Pack Spacer – 6,2mm (K2, RB, ...) 608: 8ea Pack
46. What to do if it rains? Powerslide rustproof bearings are the choice when skating in the rain. These special coated bearings protect the bearing 100% from rust. Even saltwater is not able to attack the bearing. The less expensive alternative is Black Rain bearings which come with a special CoroTec coating and BRS labyrinth shields. They prevent the bearings from dust and rain, but will not avoid the penetration. Matter has a new wheel with extreme good grip. See also Matter wheel chart. Powerslide Infinity or Interceptor wheels in hardness 83A have a good grip on wet surfaces. Also used wheels have a better grip on surface compared to new wheels. You also have to change your skating style to short but high frequency strokes instead of long and hard ones. You should also use grease, spray or lubricate your bearings prior, during and after training. Open one shield of the bearings after training. Some skaters use over-boots to protect the speed skates from rain. The ones made of neoprene protect the foot better against cold and rain, and can be used by ice-speedskaters as well. The lycra over-boots to not protect the skate, and are more or less for fashion. Recommended bearings for the rain: Rustproof (608 and 688) Black Rain (608) Recommenden wheels for the rain: Powerslide Infinity or Interceptor (688 hub) in 83A Used wheels Protection of Skates: Boot covers
47. What to do if I hear noises? Check your skate immediately if you hear any unusual noises or ratling. • • •
Check boot-frame connection and make sure all mounting screws are tightened. Check each axle and make sure there is no loose one Make sure you did not forget the spacers on your wheels
General advise: Check your skates before skating to make sure that you can enjoy skating. Always carry a wrench or necessary tools to be able to maintain your skates during skating.
Powerslide FAQs
35
48. How can I prevent blisters? Speedskates are no slippers! Speedskates must have a tight and snug fit. It might happen that skaters get problems with their new skates. Pain and blisters are the most common problems. We collected a few tips how to prevent blisters. A Leukotape Leukotape can be found in drugstores. The plaster should be placed on the areas where you expect the problems. Please note that it doesn´t stick on wet surfaces, so put the Leukotape on your skin before skating! B Second Skin This tape is not used for prevention. You use it if you have a blister already. It distributes the pressure on the blister and helps against the pain. This special plaster is available in the drugstore as well. C Moss Rubber You can find moss rubber at a shoemaker or car repair station. The self adhesive rubber is about 3mm thick. It will be placed in the shoe on the areas that cause the problems. Cut a hole in the middle of the rubber piece to take away the pressure.
49. What kind of protection sets should I use ? There are numerous helmets on the market that can be used for inline speed skating. Make sure the helmet is rather flat on the back, to avoid problems when falling backwards. Speed skaters do not like protection, but if they wear protection it should be lightweight, small and flexible. Entry level speed skaters or downhill skaters should wear crash pads. Powerslide offers two protection series for speed skaters. The Race series is recommended for top speed skaters. The race series is a Kevlar sock for arm and knee which prevents the skater against bruises when sliding over the asphalt. It doesn’t prevent the skater from heavy impacts. The Marathon series is made of a high compressed EVA foam, which is abrasion resistant. This protection set absorbs some energy of the impact and minimizes the risk of serious injuries. The segment construction gives the skater a lot of flexibility during skating. The Sports crash pad can be worn under the pants. It’s lightweight and very comfortable.
Powerslide FAQs
36
The Products R2 • • • • • • • • Picture: Powerslide R2
•
composite shell (fiberglas reinforced nylon) Skeleton Concept™ heat muldable mounting distance 195mm (size 39 – 46 EU / 7 – 12,5 US) and 165mm (size 37/38 / 5,5, 6 US) Torsion Bar X-Slot™ mounnting block (across slot front and rear) last a little wider purpose: speed beginner, skaters with wider feet, marathon skater, clubs, skater with low budget size 37-46 EU / 5,5-12,5 US
Following the trend we changed the mounting distance on the R2 model to 195mm mounting distance now. We also added a torsion bar in order to resist the higher impact that appears on shells featuring the longer mounting distance. The R2 2008 has not been changed in general in terms of construction and fit. The design is new and fresh. In other words – we improved our best seller. The R2 is a skate with a very good fit and a top pricevalue ratio. The boot comes with an „old school“ cut in the back. It gives speed beginners a better support in the ankle area. The neoprene/Lorino™ lining and the little wider last making the boot very comfortable without loosing performance. More than 90% of all skaters that tried the R2 feel well from the very first beginning. The boot is ready to skate from first minute! Once again we want to repeat that our R-series is heatmouldable although we use a composite shell construction. Please pay attention to the heating instructions that have been given bevore in our FAQ´s. Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Powerslide FAQs
37
R2 Kids • • • • • • • •
composite shell (fiberglas reinforced nylon) Skeleton Concept™ heat mouldable mounting distance 165mm mounting block 1/1 (1 hole front, 1 hole rear) only size adjustable kids skate on the market purpose: clubs, kids size: adjustable from 33 to 36 EU / 2-4,5 US
Picture: Powerslide R2 Kids Skate
The R2 kids skate is a very interesting skate for clubs and kids thanks to the possibility to adjust the size of the boot. The fit is a little bit wide in the forefoot linked to the construction of the moveable toe box but it is not a big deal if your kids wear some thick sport socks. You can also use a special neoprene sock that we developed and use in the C6 Junior skates. The last of the new model has been modified and is providing an improved snug fit now.
Powerslide FAQs
38
R4 • • • • • • • • Picture: Powerslide R4
•
composite shell (fiberglas reinforced nylon) Skeleton Concept™ heat mouldable mounnting distance 195mm (size 39 – 46 EU / 7 – 12,5 US) and 165mm (size 37/38 / 5,5, 6 US) Torsion Bar X-Slot™ mounnting block (across slot front and rear) last a little wider purpose: Speed beginner, marathon skater, inline alpin skater, skater with low budget size 37-46 EU / 5,5-12,5 US
The R4 also features the 195mm mounting system now. We use the same construction on this model like we use on the R2 mentioned before. The R4 is basically constructed like the R2 boot. Only the shaft is higher. Chemical sheets have supporting the ankle area of the boot. The high cuff is ideal for speed beginners and long distance skaters and inline alpin skaters. The area around the achilles tendon has been lowered and padded for a better comfort. Besides the high cuff the boot is exactly build like the R2, means same last, same shell construction, same paddings and lining. The R4 is ready to skate from first minute and is one of our big sellers in our speed. Once again we want to repeat that our R-series is heatmouldable although we use a composite shell construction. Please pay attention to the heating instructions that have been given bevore in our FAQ´s. Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Powerslide FAQs
39
C2 Pascal Briand Pro • • • • • • • Picture: C2
carbon shell Hollow Tube Technology™ SHMR-Technology™ heat mouldable buckle (replaceable) mounting diatance 195mm X-Slot™ mounnting block (across slot front and rear) • Sportive last • purpose: top athletes, high performance skaters, marathon skaters • size 38-46 EU
The shell of the C2 has been improved by adding the Hollow Tube Technology to the shell construction.
Carbonshell featuring Hollow Tube Technology
The fundamental value of hollow constructions is weight reduction. Hollow tubes positioned between the two mounting blocks of the carbon shell are enbedded bin a carbonfiber matrix. The structured surface of the bottom adds extra strength to the overall shell construction and enables us to reduce the layup of the carbonfiber matrix. The result is a lighter shell construction. The Hollow Tube Tedchnology can also be combined with our SKELETON CONCEPT™, which is descibed before.
Needless to say that all our carbonboots feature the SHMR Technology which makes heat moulding an easy job. Read full instructions in the FAQ´s for correct heatmoulding. Another well working feature of the C2 is the X-slot mounting block which is very common in ice speedskating. The across slot of the boot and the along slot of the specific frame (e.g. TRIPLE X or Venom) together form a cross or “X” and allowe the skater to adjust his boot frame set up to his individual preferences without any compromises. Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Powerslide FAQs
40
C4 / C4 Pure • • • • • • • Picture: Powerslide C4 pure
• • •
carbon shell X-Torsion Bar SHMR-Technology™ heat muldable buckle (replaceable AND removable) mounting distance 195mm for size 37 EU / 5,5 US and bigger (165mm for size 35 and 36 EU / 4 and 4,5 US) X-Slot™ mounting block (across slot front and rear) sportive last purpose: top skater, marathon skater, speed beginner, kids, clubs, low budget skater size 38-50 EU / 6-15,5 US (men) and size 35-42 EU / 4-9 US (woman)
The C4 is a high performance race shoe offered at a price level of a high end fitness skate. The features of the boot can be found in high end racing shoes as well. The boot is a hot tip in the szene because of the great price-value ratio. The last of the C4 is absolutely identical with the C2, C6 (195mm) from Powerslide or the Triple X from Core Racing. The shell construction is the same and all models use the SHMR Technology. New in 2008 is the shell construction. The bottom of the shell is reinforced through the X-Torsion Bar like the Triple X racing shoe. The difference between the two models is the way of manufacturing. The Triple X is made by (expensive) moulds wether the C4 is made by regular vacuum system. In the end you can see a much nicer finish (sharp edges) of the bottom structur on the Triple X shoe vs. the C4 shoe which has rather soft edges. The price difference between the models mentioned above is based on different materials that are used for uppers, padding etc. or in the different designs / patterns of the shoes. The more simple a design the shorter and easier is the manufacturing process at certain steps (e.g. stitching). The C4 race shoe comes with a comfortable neoprene / Lorino liner. Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Picture. Powerslide C4 Men
Powerslide FAQs
41
C6 • • • • • • Picture: C6 Yann Guyader
• • •
fiberglas shell SHMR-Technology™ boot heatmouldable micro adjustable buckle (removable and replaceable) mounting distance 195mm for size 37 EU / 5,5 US and bigger (165mm for size 35 and 36 EU / 4 and 4,5 US) X-Slot™ mounting block (across slot front and rear) sportive last Purpose: speed beginner, marathon skater, kids, clubs, low budget skater size 38-46 EU / 6-12,5 US
The excentric frenchman and world champion Yann Guyader has given this high performance boot his name. The C6 is a fiberglass based shoe with a lot of interesting features and awsome design. The boot already features the SHMR Technology™ like all our carbonfiber skates. The 195mm mounting distance has been incorporated to the boot as well as the X-Slot mounting system that we use on our top of the line race boots. The sportive last and the soft padded low cuff fullfil the criterias of a modern speed boot. Lorino™ and neoprene are used for the liner which makes the boot very comfortable. The “metal mesh look” of the shell is caused by a special textile material that covers the last fiberglass layup. The result is a much nicer finish than the waterslide graphic that has been used before. The last we use for the C6 is the same as for example the C4 or the Core Triple X as mentioned before. The C6 is probably the best value product in the market! We offer the boot in 3 different color combinations in 2009. black/green, black/silver and white/gold (starting at size 35 EU / 4 US). Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Picture: C6 white / gold
Picture. C6 black / silver
Powerslide FAQs
42
C6 / 165mm • • • • • • picture: C6 / 165mm
• • •
Fiberglass shell SHMR-Technology Boot heatmouldable micro adjustable buckle (removable and replaceable) mounting distance 195mm X-Slot™ mounting block (across slot front and rear) sportive last Purpose: speed beginner, marathon skater, kids, clubs, low budget skater size 38-46 EU / 6-12,5 US
There is still a demand for boots featuring the 165mm mounting distance. The C6 is the one and only model of the carbon/composite family which keeps the traditional standard mounting system. The overall construction is the same as the C6 Yann Guyader racing shoe mentioned before. Just the design is different and the two powerstraps are missing.
Powerslide FAQs
43
C6 Kids • • • • • • • Picture: C6 Kids in double sizes!
• • • •
fiberglas shell SHMR-Technology™ boot heatmouldable micro adjustable buckle (removable and replaceable) mounting distance 150mm for shoe size 32 and 33 mounting distance 165mm from shoe size 34 to 39 mounting block H4 (4 holes in front and rear) for shoe size 37 and smaller sportive last neoprene liner included Purpose: Kids, clubs size 32/33, 34/35, 36/37, 38/39 / 14,5-7 (US)
The C6 is a fiberglas shoe with a lot of interesting features. The small sizes make the boot interesting for clubs especially. This kids boot has some unique features. The boot already features the SHMR Technology™ like all our carbonfiber and fiberglass skates. The 4 hole mounting block and the replaceable speed buckle are also standard features of the boot. The sportive last and the soft padded low cuff fullfil the criteria of a modern speed boot. Lorino™ and neoprene are used for the liner, which makes the boot very comfortable. The kids boot comes in double size for example size 32/33. The shell size is Size 33. The added neoprene liner (washable) can be used for Kids wearing size 32. This means that the kids have some kind of adjustable skate covering two sizes. A great performance speedskate for kids tested and approved by many clubs.
The shoe fits one size smaller when using the additional neoprene liner and the boot can be used for a longer time
Powerslide FAQs
44
C8 • • • • • • •
Picture: Powerslide C8
• • •
fiberglas shell SHMR-Technology™ Boot heat muldable Universal Flap micro adjustable buckle (removable and replaceable) mounting distance 195mm X-Slot™ mounting block (across slot front and rear) sportive last purpose: speed beginner, marathon skater, inline alpin skater size 38-46 EU
The principle of the construction between R2 and R4 on the composite shoes from Powerslide is also used for the C6 and the C8 model. Both, the C6 and C8 have an iodentical shell construction. Chemical sheets in the cuff region „transform” the low cut racing shoe to a high cut marathon speed boot. The advantage of the C8 compared with the R4 is the SHMR Technology™. The last of the C4 is more sportive like the R4 and more adressed to racing. Both models, the R4 and C8 come with a Lorino™/neoprene lining. The C8 features the new universal flap system. The buckle is usually placed on the outside of a todays modern racing shoe. During a fall the buckle can be either hevily damaged or even rip off and need to be replaced. The Universal Flap System now enables the skater to chose his prefered position for the buckle. He can place it on the outside as common or on top of the flap. The antirivets on the flap are hidden by a rubber logo which simply needs to be taken away for assembly. The cuff has been lowered and softly padded for more comfort while skating. The C8 is also a perfect boot for nordic skating, inline alpin skating or freeskating. Please note that we offer the C8 only as a complete skate set up. Different skaters have different needs and for this reason the C8 skate packages feature either the 165mm mounting distance (freeskating, inline alpin skating, nordic skating) or the 195mm mounting distance (speed skating) Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Powerslide FAQs
45
Icon / Icon Air • • • • • •
Picture: Core Icon Smart Shell Featuring the BIG AIR Skeleton-C Concept
• • • • • • • •
•
Carbon shell Smart Shell™ Air Ventilation SHMR-Technology Boot heat mouldable micro adjustable buckle (replaceable and removable) Asymetrical lacing Bionic Bridge Design™ Mesh material (Icon Air) with air ventilation Waterdrop Suprafibre (WDS) liner mounting distance 195mm mounting block X-Slot (along mounting front and rear) race ready performance last purpose: top athletes, high performance, marathon skater size 38-46 EU / 8-12,5 US (men)
The brandnew Core Racing ICON Shoe has been developed in close cooperation with world champion Kalon Dobin (NZN). The boot features a revolutionary shell construction and a never experiences Sekond Skin Technology fit SECOND SKIN TECHNOLOGY This new technology, which you will find only in Powerslide and Core speed skates, is not just one little change, but it is an interaction of different technical achievements which are totally new. The SECOND TECHNOLOGY conists of the folloing points: 1. 2. 3. 4. 5. 6.
New Smart Shell New anatomical 3-D padding Outside microfiber material Waterdrop Suprafiber (WDS) lining material Bionic Bridge Design Asymmetrical Lacing System
The results are: 1. An unmatched comfort, fit and feeling 2. Ultimate performace power transfer 3. Improved blood circulation 4. No pressure points on the back of the foot The new 3-D anatomical padding is located in the shoe were you need it. Tested and approved by multiple times world champion Kalon Dobbin. The new padding is not taking away space inside the shoe where you would need it, but fills up the empty spaces to give more comfort and control everywhere. This makes the boot more comfortable than any other boot outthere. Test it to find out.
Powerslide FAQs
46
LORINO outside microfiber material is soft but strong. This outstanding material wraps around the foot like a sock and provides the support and performance the modern skater is looking for. Bionic Bridge Design is a radical change in internal and external boot design. It was not invented by Powerslide, we just learned from our mother nature and architecture. Bridges are built to last and withstand the forces of nature. Hanging bridges are designed after the Bionic constructions of spiders nets, holding up tons of weight and forces. This bionical construcution has now been transferred of Powerslide skates. Reinforcement where needed, flex and freedom of movement in all other areas. A new sensation of wrap around fit provided by stiching lines, internal reinforcement bridges and internal longtudinal softfibers result in more speed per stride, with an unmatched comfort. Design follows function at the very best, not just look and design. Pure performance, light weight construction and pure skating feeling. Assymetrical Lacing Systems are not only trendy, they provide a better push and control while inceasing blood circulation in the foot and less sore feet. Contrary to other boots on the market, Kalon decided to put the lacing from the outside to the inside, giving you more material and support on the outside, where the force of the push is concentrated. Again this provides a more effective stride and better power transmission. Our new Waterdrop Suprafiber (WDS) is an all new very special and sensitive Microfiber that we use for the inside lining. The fibers are extra long to give more comfort and due to their hollow design they are also able to transport moisture away from the skin. WDS is very soft to the skin with excellent and luxurious draping qualities. But what makes the real difference to conventional microfibers are the hollow dimples. They contain hollow fibers that create air circulation, providing an extra cooling effect. That means in the end less heat / sweat inside the shoe and a higher comfort. Furthermore it results in better blood circulation and less fatigue of the foot for an overall improvement of performance. The heart of our boot is our new Smart Shell - a brandnew, worldwide invention from Powerslide. Ribs and raised up parts give stabiliy and stiffness, we all know this from the Triple X boot featuring the X-Torsion Bar, which has the stiffest sole of all skating boots and is yet to be matched. But the Kalon shell took it one step further. Now we reinforced not only the bottom of the shell, but also the side / cuff area. New 3-D foams provide a new shape, based on the X-torsion bar that give stability to the bottom, but also make the ankle area stiffer for an improved power transfer. In combination with the X-slot mounting and air ventilation added to the boot upper and the shell, this boot is the ultimate racing machine all skaters have been waiting for. Convince yourself and test it! Feel how the power, fit and comfort bring you to the next level of skating. Beside the Core ICON we will also offer the Core ICON AIR in 2009. Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Powerslide FAQs
47
TRIPLE X / Triple X Pure
Picture: Core TRIPLE X black/silver Featuring the BIG AIR Skeleton-C Concept
• • • • • • • • • • • • • •
1st generation Skeleton-C Concept with Air channel
Carbon shell Skeleton-C Concept™ torsion bar air ventilation SHMR-Technology™ Boot heat mouldable Lorino™ Liner Universal Flap micro adjustable buckle (replaceable and removable) mounting distance 195mm for size 37 EU / 5,5 US and bigger (165mm for size 35 and 36 EU / 4 and 4,5 US) mounting block X-Slot (alog mounting front and rear) race ready performance last purpose: top athletes, high performance, marathon skater size 38-46 EU / 8-12,5 US (men) and size 35-42 EU / 4-9 US (woman)
The SKELETON-C CONCEPT™ enabled us to incorporate a CLIMATE CONTROL SYSTEM™ - one of the key features of modern running shoes. It was now available in inline racing shoes for the first time. The outside air flows into the air channels underneath the race shoe and reaches the inner boot through the perforated liner and innersole. The system has been perfectionized over the years in order to improve the performance of the skater. The foot stays cooler and the skater feels more fresh while skating – perfect for really hot conditions.
The Core XXX race shoe had huge impact and leads into the future of speedskating. You can find reinforcements of the shell in X-shape similar to our X-Torsion Bar in competitors´ models as well as air ventilation systems.
2nd generation Skeleton-C Concept featuring BIG AIR chanels
Powerslide FAQs
48
Reinforced shell construction - the X-Torsion bar
The new X-TORSION BAR SYSTEM™ in the construction of the carbon shell allowed Powerslide to build light weight and stiff shells, without increasing the weight by just adding more material to the shell construction. The advantage is the high resistance of the shell against high forces that occur during skating, especially when the shell has the new and long 195mm mounting standard. Another advantage is the 1:1 transfer of the energy of each push to the
frame and further to the wheels where it´s needed. The “X” is known as a very strong construction that you can find everywhere since millions of years in the nature of our earth, in modern architecture and engineering. Like for all of our carbon , shoes we also use the SHMR Technology™ on the TRIPLE X race shoes supporting easy heat moulding adjustments on the shell to the individual anatomic of the skaters foot when necessary. This top of the line racing shoe features two powerstraps, the new universal flap that has been explained before (see C8), Lorino™ microfiber lining and the X-Slot mounting system. Attention! We recommend to combine this boot with a frame featuring the so called ALONG mounting slot. You can still use frames with regular hoizontal mounting slots, but the possibilities to adjust the boot – frame – set up will be limited in this case.
Picture: Triple X Pure
Powerslide FAQs
49
Speed Frames
Icon Schiene • 7000er Aluminium • Super Extrusion Concept™ • One Block Extrusion • Low profile frame • 195mm mounting distance • X-Slot™ mounting system • Single Axle System • M7 axles with torx system • Lazer print Die ICON frame is the new flagship designed by Powerslide. This frame has been tested one year long by Yann Guyader (FRA) winning many titles such as gold at Worlds or European Championships, winning the overall ranking at the World Inline Cup (WIC), Swiss Inline Cup (SIC) and French Inline Cup (FIC) as well as important races like the 3 Pistes in France or the Kriterium in Germany. The secret of the frame is it´s unique construction. The Icon frame is very stiff in the middle block and has a little bit of flex on the wings. The frame is extruded out of one block by a super big extrusion machines which has more power and squeezes the aluminium material much more than regular extrusion machines which results in a stiffer construction. We call is the Super Extrusion Concept™. The CNC work in the second Stepp gives the Icon frame a unique and extraordinary design on one hand but also results in an optimal stiffness/flex ratio as decribed before. First we introduce the successful 3x110mm / 1x100mm set up and later in the year the 4x110mm version will follow.
Powerslide FAQs
Picture: Core TRIPLE X frame
50
TRIPLE X Frame • 7000 aluminium • X-Box Design™ • 195mm mounting distance • low profile frame • along and across mounting system offered • Single Axle System • M7 axles with torx system • lazer print
The new X-trusion of the Core TRIPLE X frame will be used for both materials, magnesium and aluminium. The X-Box Design™ of the frame add strength to the frame where needed and reduce the overall weight as much as possible. The 195mm mounting distance of the frame helps to bring down the gravity point. The skater will stay around 5mm higher than on usual 84mm frame set ups (front 97mm / rear 108mm). Besides the regular across or horizontal mounting slot speedframes are offering the TRIPLE X frame will also offer an along slot the so called X-Slot™. The combination of the X-Slot Design™ of both the mounting block of the shoe and the frame give the skater endless variations for the individual position of the frame. The Core TRIPLE X 4x100mm frame will be offered in 12,8” and 13,3” for 4x100mm wheels as well as in 12,4” especially for woman. We also offer the Triple X frame with 110mm wheels or with 3x110mm / 1x 100mm set up. The keywords for this premium performance frame are: * X-tra stiff * X-tra light * X-tra fast
Powerslide FAQs
Picture: Powerslide Double X frame 3x100mm /1x90mm
51
Double X Frame • 7000er Aluminium • 195mm mounting distance • low profile frame • along and across mounting system offered • Single Axle System • M7 axles with torx system • lazer print
The Double X frame is related ith the Core Racing Triple X frame by using a similar but not as fancy extrusion. It´s also a very stiff and responsive frame that skaters wish to have. We offer the Double X frame with both mounting systems – ALONG and ACROSS. The so called X-Slot system has been described a few times before already. It´s the most perfected system to customize the individual boot-frame-adjustment to optimize the performance. There are two models of the Double X frame on the market right now. One is Powerslide´s first 3x100mm frame (10,25”) for kids, the other a 3x100mm/1x90mm set up. Check the national rules if the 3x100mm frames are allowed for kids. Usually the federations limit the size of wheels for certain age groups.
Picture shows Powerslide Venom 4x100mm frame with X-Slot™ mounting system
Venom Frame • 7000 aluminium • double voided • 165mm and 195mm mounting distance used on most models • single axle system • M7 axles with torx system • lazer print
The Venom frame has a very stiff construction. Engeneers from Bosch have supported this project with their expertise. The high performance frame comes with a laser print. The Venom frame will be offered with a multiple mounting solutions for most of the models. This means the skater has the choice between the 165mm and 195mm standard and doesn´t have to purchase a complete new set up. The Venom 13“ 4x100mm frame will be also offered with a X-Slot™ mounting system to offer an alternative frame besides the Core Triple X fitting the new Core Racing, Powerslide or Luigino racing shoes as descipbed before.
Powerslide FAQs
Picture: V-Type frame
52
V-type Frame • 7000 aluminium • double voided • 165mm mounting distance • single axle system • M7 axles with torx system
The V-type is the new entry level frame at Powerslide, replacing the Spirit and Vision frame. All V-type frames feature the regular 165mm mounting standard for those skaters who do not want to change their boots. The V-type will be offered only in the 13,3” / 4x100mm version.